Skip to main content

Troubleshoot 1203 Error on Lexmark X4250/X4270/F4270 Printers

A 1203 error message on the operator panel could indicate a problem with one of the ink cartridges. Please carry out the steps below the image to confirm that this is a cartridge failure rather than a hardware problem.




    Make sure the All-In-One is powered on. Pull the control panel towards you, and then open the cartridge access door. The print cartridge carrier moves and stops at the loading position. Pull the old cartridges towards you, and then lift them out. With the cartridges out of the printer, shut the access door and the control panel. Power the printer OFF and then back ON. Check the operator panel to see if the same error has returned or if a new message has appeared. If the message displayed is 1203, there is something wrong with the printer hardware. If the message now displaying is Cartridge Missing, do the following:  
    1. Reinstall the cartridges into the printer.
    2. Insert the color cartridge in the left carrier. Insert the black cartridge in the right carrier.

       
    3. Push back firmly on the cartridges until they snap securely into place.
    4. Close the cartridge access door, and then close the control panel.
    5. If the 1203 message is still present on the operator panel, you need to insert one cartridge at a time to determine which cartridge is producing the failure.
    6. With one cartridge in the carrier, close the access door and control panel.
    7. Check the operator panel. If the 1203 error is displayed, this cartridge is the defective item.
      If the Cartridge Missing message is displayed, the second cartridge is producing the failure.
    8. Please replace the defective cartridge.
Labels:

Comments

Post a Comment

Popular posts from this blog

Printer Troubleshooting - Tips to Restore Laser Printer Performance

Like all laser printers, the Kyocera laser printer also has its set of performance woes that could be resolved by simple troubleshooting. When the printer has been in operation for a long time, troubles usually commence with the rubber rollers or from the sensitive components that are already aging. However if trouble emanates from the toner cartridge, a Kyocera compatible cartridge replacement can resolve the issue and allow trouble free printing to proceed once again. Defective Rollers. The function of the rubber rollers is to seamlessly move paper from one printer component to the next; failure often results in paper jams. The Kyocera laser printer employs several of these rubber rollers in its operations. This begins with the pick-up rollers from the paper tray to the OPC Drum (Organic Photo Receptive); to the fuser assembly rollers and down to the exit rollers that is responsible for the exit of paper from the printer. Since paper is abrasive, continuous contact will result in t...
1 comment
Read more

Samsung ML-1640 Printer

Samsung offers an exclusive printer under the tag of ML-1640 . This printer uses the laser technology. The printer works in monochromatic ink. The speed provided by the printer is good enough. The range is approximated to be 16 pages per minute. The dimension of the printer is 353 mm x 209 mm x 298 mm for width, height and depth respectively. The machine weighs near about 5.7 kgs. It has a special memory block of 8 MB. The features of the Samsung ML-840 Printers are better from the other similar printers of its kind. The printer offers a sound resolution of 1200dpi x 600dpi, which is really good. The MLT-D1082S cartridge used enhances the quality of the prints to a great extent. The technical aspect of these printers is worth for the price charged of the Samsung ML-1640 . The quality on the basis of resolution gives a clear picture view. The connection to the system can be made by the use of simple USB ports instead of the group of wires that often creates a messy appearance near ...
3 comments
Read more

Lexmark Printer Error 900-43

Error Code Error Message Solutions ERROR 20 ERROR 200 Input Paper Sensor was not triggered - Paper may be jammed at the sensor. Remove toner cartridge for better access to jammed paper.   Paper not being picked up check paper tray & pickup rollers Replace rollers if worn smooth or cracked ERROR 21 The exit sensor was not made in time after the input sensor as made. ERROR 22 The exit sensor was not unmade in time. ERROR 23 Jam at the duplex unit. Paper is either not leaving the duplex entry sensor in time ...
1 comment
Read more